Ball screws and linear guides, made in the EU.
Screws, guides, modules and lubrication come out of our own production near Vilnius. The rest of the axis comes from the same catalogue — one supplier, one delivery, one invoice.
Made to drawing · certificates and inspection records on request
Eight groups, one axis
Three management systems, audited by SGS
Quality, environment and occupational health & safety. Review the certificate holder and scope on each signed document before relying on it for a project.
22.07.2025 – 21.07.2028Certificate holder: Sacom, UAB. Open a card for the signed PDF, holder and scope.
A factory and a supplier — and every product says which one it is.
Parts on the left are made to drawing. Parts on the right are original components supplied through the catalogue, so the whole axis can be sourced together.
We make it
Quoted from a drawing or a sample. The specification and production route are confirmed before the offer.
- Ball screws — rolled, ground and whirled
- Trapezoidal screws and nuts, DIN 103 and custom
- Planetary roller screws for high-load axes
- Profile linear guides, rails cut and drilled to length
- Linear modules KK · ACS · ACB · ACR · ACL
- Centralised lubrication pumps and metering devices
- Shaft-end machining to your print
We supply it
Original industrial components, stocked or ordered against your requirements.
- Ball, roller and needle bearings
- Bearing units, split housings, slewing rings
- Planetary gearboxes and servo systems
- Roller chains, sprockets, belts and pulleys
- Couplings, seals and cable carriers
- Hydraulic cylinders
- Lubricants, mounting and maintenance tools
The screw failed, the machine is down, the brand no longer sells the part.
Give us the old part number or the brand. We review mounting dimensions, lead and accuracy before proposing an alternative. If the original is available, we can compare both routes.
- Worn ball screws on CNC machinesRestore the axis from the available part, drawing or measurements.
- Discontinued and imported machineryReview possible replacements when a drawing is missing.
- Non-standard trapezoidal screwsCheck length, end machining and nut material together.
Find an equivalent
Send the details you have. An engineer will review the request.
From drawing to delivered part
Drawing or sample
Send a PDF, CAD file, photo or the worn part's key dimensions.
Technical review
We check feasibility, accuracy and the suitable manufacturing route.
Quotation
The offer confirms price, specification and estimated lead time.
Production & delivery
Parts are produced or sourced, checked and shipped as agreed.
The same axis, without the catalogue markup
Compare indicative positions for similar parts. Final pricing depends on dimensions, accuracy, quantity and delivery requirements.
Tell us which documents you need. We will send available current files.
Illustrative comparisons; request a current quotation for your part, quantity and delivery requirements.
Recently added products
One enquiry for the axis
Put the screw, guide, drive and related components into a single technical discussion.
Start with what you have
A drawing, photo, part number or short description can start the review.
Browse by specification
Compare product families, images and available options in the catalogue.
Quotation for custom work
Send your requirements and supporting files for a tailored proposal.
19 years of this, in photographs
The workshop, trade fairs and engineers behind each enquiry.
Production and machining
WorkshopMeeting customers at trade fairs
EventsInspection and measurement
QualityThe engineering team
PeopleParts ready for dispatch
DeliveryReviewing a worn component
Reverse engineeringRequest the current AXISCRAFT catalogue
Tell us which product group you are evaluating. We will send the current approved documents and dimension information available for it.
Questions we get every week
Still unanswered? Send the drawing or ask the team directly.
Send us your drawing or part number.
We will review the requirement and respond with the next steps.